Skip to product information
1 of 10

Levity Hovercraft - 3D Print Files

Levity Hovercraft - 3D Print Files

MMRC Designed by MMRC
Regular price $45.00 USD
Regular price $0.00 USD Sale price $45.00 USD
Save! Sold out
Shipping calculated at checkout.

⚠️ This is a Digital Download Only. No physical parts included. ⚠️

LEVITY is a fully 3D-printed, high-performance RC hovercraft designed by MMRC. Engineered from the ground up to be wicked fast, capable across all terrain, and an absolute blast to drive, LEVITY takes the classic scratch-built hovercraft concept and turns it into a legit, dialed-in 3D-printable machine.

What Makes LEVITY Different?

  • A 3D-Printed Skirt That Actually Works: The skirt is the hardest part of any RC hovercraft, but LEVITY makes it simple. The standard LEVITY uses a modular, segmented skirt made entirely from TPU. Designed to be incredibly easy to print (no TPU tuning headaches required) and straightforward to assemble, it means no fabric cutting, sewing, or complicated templates. It’s the simplest way to build a high-performance hovercraft, and it works incredibly well on non-abrasive surfaces.
  • Independent Lift & Thrust: Separating the lift and thrust motors unlocks total control. Run separate lift and throttle channels, or dial in custom transmitter mixes—like using the lift system for braking when you let off the throttle. Configure the controls to match how you drive.
  • Built to Send on Land & Water: LEVITY accelerates hard, carries speed through corners in tight spaces, and handles dirt, rough ground, loose surfaces, and water.

Print It. Build It. Send It.

  • PRINT: Designed around standard desktop 3D printers. Every component fits on a 256 × 256 mm build plate using standard PLA for the hull and structural parts and TPU for the flexible skirt. Minimal, easy-to-remove supports are needed on only a few parts—no large-format printers or specialty filaments required.
  • BUILD: Uses readily available RC electronics and standard metric hardware—not proprietary parts. Motor mounts accept standard 16–19 mm mounting patterns and 5.1" FPV propellers for both lift and thrust, giving you the freedom to run the recommended setup or push the performance envelope with your own gear. (Need the screws, nuts, and magnets? Grab the matching LEVITY Hardware Kit right here on RCPrinter.)

What’s Included in Your Download

  • Complete STL File Set for the standard LEVITY build
  • Pre-Configured Bambu Studio Projects (including test-print parts to verify printer tolerances before committing to a full hull print)
  • Print Matrix detailing recommended print settings for every component
  • Detailed Bill of Materials (BOM) covering all fasteners and recommended off-the-shelf electronics
  • Step-by-Step Build & Setup Guide (including video instructions)

Important Notes

  • Digital Download Only: This listing is for the 3D print files and build documentation only. No physical 3D-printed parts, hardware, or electronics are shipped with this product.
  • Printer Calibration: Several parts rely on tight mechanical fits; a well-tuned desktop printer is recommended (all prototypes were tested on calibrated Bambu Lab printers).

Product Support

Join the Discord here:

https://discord.gg/6XYSWPpzC

Product License

License terms. By purchasing the files, you agree to the following:

  • Personal Use Only: You are welcome to print and use the model as your own project. Please do not share, redistribute, or upload the files anywhere else.
  • Non-Commercial: You are not allowed to sell physical 3D-printed copies of the product. One-time sale of your model after you stopped using it is a fair exception.
View full details